2024-03-29T14:46:57Z
https://ijr.kntu.ac.ir/?_action=export&rf=summon&issue=2127
International Journal of Robotics, Theory and Applications
IJR
2008-7144
2008-7144
2016
4
4
A Novel Multimode Mobile Robot with Adaptable Wheel Geometry for Maneuverability Improvement
Arman
Mardani
Saeed
Ebrahimi
In this paper, an innovative mobile platform is presented which is equipped by three new wheels. The core of the new idea is to establish a new design of rigid circular structure which can be implemented as a wheel by variable radius. The structure of wheel includes a circular pattern of a simple two-link mechanism assembled to obtain a wheel shape. Each wheel has two degrees of freedom. The first is to rotate wheel axis and the second is to change the wheel radius. As the first step, after definition of the new model, its spatial kinematics and constraints will be formulated. The well-known Newton-Raphson algorithm is implemented to find the current response of the kinematic model. A semi-dynamic formulation is further utilized to find the torque of motors for adapting the required wheel radius for maneuverability improvement on rough surfaces. The principles of virtual work will be used to extract the torque values numerically. The ability of the proposed robot for performing the required tasks will finally be checked by some simulations.
adaptable wheel geometry
multimode mobile robot
maneuverability
kinematic analysis
2016
03
01
1
15
https://ijr.kntu.ac.ir/article_165700_aeefc331711f244673d58bad6b40f105.pdf
International Journal of Robotics, Theory and Applications
IJR
2008-7144
2008-7144
2016
4
4
A Navigation System for Autonomous Robot Operating in Unknown and Dynamic Environment: Escaping Algorithm
Farnaz
Adib yaghmaie
Amir
Mobarhani
Hamidreza
Taghirad
In this study, the problem of navigation in dynamic and unknown environment is investigated and a navigation method based on force field approach is suggested. It is assumed that the robot performs navigation in unknown environment and builds the map through SLAM procedure. Since the moving objects' location and properties are unknown, they are identified and tracked by Kalman filter. Kalman observer provides important information about next paths of moving objects which are employed in finding collision point and time in future. In the time of collision detection, a modifying force is added to repulsive and attractive forces corresponding to the static environment and leads the robot to avoid collision. Moreover, a safe turning angle is defined to assure safe navigation of the robot. The performance of proposed method, named Escaping Algorithm, is verified through different simulation and experimental tests. Besides, comparison between Escaping Algorithm and Probabilistic Velocity Obstacle, based on computational complexity and required steps for finishing the mission is provided in this paper. The results show Escaping Algorithm outperforms PVO in term of dynamic obstacle avoidance and complexity as a practical method for autonomous navigation Abstract—In this study, the problem of navigation in dynamic and unknown environment is investigated and a navigation method based on force field approach is suggested. It is assumed that the robot performs navigation in unknown environment and builds the map through SLAM procedure. Since the moving objects' location and properties are unknown, they are identified and tracked by Kalman filter. Kalman observer provides important information about next paths of moving objects which are employed in finding collision point and time in future. In the time of collision detection, a modifying force is added to repulsive and attractive forces corresponding to the static environment and leads the robot to avoid collision. Moreover, a safe turning angle is defined to assure safe navigation of the robot. The performance of proposed method, named Escaping Algorithm, is verified through different simulation and experimental tests. Besides, comparison between Escaping Algorithm and Probabilistic Velocity Obstacle, based on computational complexity and required steps for finishing the mission is provided in this paper. The results show Escaping Algorithm outperforms PVO in term of dynamic obstacle avoidance and complexity as a practical method for autonomous navigation.
2016
03
01
16
31
https://ijr.kntu.ac.ir/article_41607_d7e0e353d404db1f677bb8bf235fcaf3.pdf
International Journal of Robotics, Theory and Applications
IJR
2008-7144
2008-7144
2016
4
4
Exploring Social Robots as a tool for Special Education to teach English to Iranian Kids with Autism
Minoo
Alemi
This paper investigates the effects of Robot Assisted Language Learning (RALL) on English vocabulary learning and retention of Iranian children with high-functioning autism. Two groups of three male students (6-10 years old) with high-functioning autism participated in the current study. The humanoid robot NAO was used as a teacher assistant to teach English to in one group whereas no robot was used in the other group. Both group programs consisted of 12 sessions held within a 2-month period. Using a pre-test, mid-test, immediate post-test, delayed post-test design, this study measured the learning gains of the participants. The group with the humanoid robot outperformed the other group in the designed tests which showed the effectiveness of robot assisted language learning. This was further supported by comparing and contrasting the both groups’ parents’ feedbacks as well as the results obtained from the qualitative analysis of the video records. The findings of this study could be a starting point for a new line of research in second/foreign language education specific to children with autism.
Social Humanoid robot
High-functioning autism
Foreign language education
RALL
vocabulary learning
2016
03
01
32
43
https://ijr.kntu.ac.ir/article_165699_ff2a61ce1568adaa77d850ef1daf8a31.pdf
International Journal of Robotics, Theory and Applications
IJR
2008-7144
2008-7144
2016
4
4
Tumor Detection and Morphology Assessment in the Liver Tissue Using an Automatic Tactile Robot
Seyed Mohammad Salman
Lari
Afsaneh
Mojra
In this paper an automatic examination robot was developed to improve the process of cancer detection, tumor localization and geometrical shape diagnosis. A uniformly distributed compressive load was applied to the top tissue surface and the resultant mechanical stress was measured that was employed for the tumor diagnosis task. The experimental examinations were performed on the soft tissue of the liver. A compression test was used to extract viscoelastic properties of tissue. Viscoelastic coefficients were used in the finite element modeling and the capability of the robotic-assisted tumor detection procedure was verified. Finally to localize the tumor embedded in the tissue, two sinusoidal and step paths were generated which was followed by the robot. The mean errors of path following by the automatic examination robot affirmed the accuracy and the reliability of the Cartesian mechanism in the soft tissue scanning.
Soft tissue
Mechanical stress
Tumor diagnosis
Robotic examination
2016
03
01
44
53
https://ijr.kntu.ac.ir/article_41610_8a3c52cd22333603aed30562afb7ad71.pdf
International Journal of Robotics, Theory and Applications
IJR
2008-7144
2008-7144
2016
4
4
Dynamic modeling and control of a 4 DOF robotic finger using robust adaptive and neural adaptive controllers
Fatemeh
Katibeh
Mohammad
Eghtesad
Yousef
Bazargan-Lari
Human hands are a great challenge and fascinate many roboticists since they present tremendous skill and versatility .In this research, kinematic and dynamic equations of a 4-DOF 3-link robotic finger are derived using Lagrangian formulations. The main idea for modeling the muscles is placing several springs and dampers between the linkages. By using this idea, dynamic equations of a 4-DOF robotic finger will be derived. By taking advantage of these dynamic models for robotic finger and robotic hand, applying some advanced controllers, which can control the system in presence of parametric uncertainty, will be possible. In order to track the desired trajectory of tapping, tow advanced controllers consisting of adaptive-robust and adaptive-neural are applied to the robotic finger considering a 10% parametric uncertainty in the parameters of the system. By comparing the simulation results of tracking errors and input torques, it is revealed that the adaptive-neural controller has a better performance.
Biomechanics
Robotic Finger
Dynamic Modeling
Nural-adaptive controller
Robust-Adaptive controller
2016
03
01
54
64
https://ijr.kntu.ac.ir/article_165698_b9ce9b8d5f4d9be6e874ce88710f3839.pdf
International Journal of Robotics, Theory and Applications
IJR
2008-7144
2008-7144
2016
4
4
Soft Tissue Modeling Using ANFIS for Training Diagnosis of Breast Cancer in Haptic Simulator
Saeed
Amirkhani
Ali
Nahvi
Soft tissue modeling for the creation of a haptic simulator for training medical skills has been the focus of many attempts up to now. In soft tissue modeling the most important parameter considered is its being real-time, as well as its accuracy and sensitivity. In this paper, ANFIS approach is used to present a nonlinear model for soft tissue. The required data for training the neuro-fuzzy model of soft tissue is provided from breast tissue numerical modeling in ANSYS 12.0 software. To validate the ANSYS mode, numerical data have been compared with the experimental data with an average error of less than 3%. On the other hand, for the validation of ANFIS model, testing session indicates a root mean square error of less than 0.02 (N), which shows the high degree of accuracy for the presented model. To evaluate the efficiency of this model, it has been used in the breast cancerous tumors diagnosis training haptic simulator. The presented model’s real-time feature is about 100 times more than the maximum amount needed for force modeling simulations.
Neuro-Fuzzy
haptic simulation
soft tissue modeling
breast cancer
2016
03
01
65
72
https://ijr.kntu.ac.ir/article_43094_5110b7f7ad20efa7b3a5d999070d78d5.pdf